Menu
Service
English
ABS Edgings
Melamine Edgings
Real Wood Edgings
Aluminium Edgings
PP Edgings
T-Bar Edgings
Clamp-fit Edgings
Acrylic Edgings
Varnishable Edgings
PVC Edgings
Hotmelt Adhesives
Linoleum edgings
Furniture Luminaires
Handles
Knobs
Handle Elements
Handle Profiles
Handleless Systems
Wardrobe
Staircase & Balustrade Systems
Furniture Linoleum
Sibu Design Boards
Natural Surfaces
Wall design
Wooden Slats
Construction Profiles
Functional Profiles
Decorative Profiles
Carcass Connection
Universal Fastening Systems for Furniture
Angle and Flat Connectors
Worktop Connectors
Cabinet Suspension Brackets
Shelf support
Adjustment Systems for Seating Furniture and Beds
Plinth Systems
Mounting Solutions
Screws & Sleeves
Hinges
Flap fittings
Glass frames
Furniture Roller Shutters
Sliding Doors For Furniture
Fittings for Wardrobes and Cabinets
Drawer Systems
Extension Runners
Castors and Trolleys
Furniture Feet
Table Fittings
Office Management
Locking Systems
Silent Systems
Waste Separation Systems
Midway Systems
Plinth Panels
Shelving Systems
Edge Processing & Edging Storage
Workshop and Construction Site Supplies
Hand Tools
Ergonomic Tools & Aids
Polishing & Abrasives
Workplace Safety
Packaging
Processing Technology
Adhesives
Cleaners, Release Agents & Lubricants
Surface Correction
Backing & Lining Foils
Mounting Solutions
close
Sprayable contact adhesive REDOCOL Osterbond 570.52 Fine Fix
Accessory
Details
Downloads
Accessory
Details
Product description
REDOCOL Osterbond Spray 570.52 Fine Fix is a sprayable contact adhesive with a very fine spray pattern for all laminates (HPL), wood veneer, high gloss foils and postforming elements. Thanks to the ultra fine mist the adhesive is spread very evenly over the surface. Defects or adhesive build-up are prevented. Thin and demanding surfaces such as high gloss foils or laminates can be optionally bonded. Irregularities or an "orange peel" effect are prevented.
Product features
- Fine and thin adhesive application
- Low consumption
- Moisture-resistant
- High initial strength, fast drying
- Heat-resistant to + 115 °C
- Free of methylene chloride
Tips
Shake or roll the glue tank well before use and apply adhesive to both sides of the materials to be bonded. Allow to dry for 1-2 minutes, then join the components and press within 30 minutes at the latest. The optimum processing temperature is between 15 and 25 °C. For a good bond, we recommend that the workpieces are first acclimatised to room temperature after pressing.
Product information
| Application | Apply on both sides |
| Approx. usage | ≈ 100 g/m² |
| Base material | Styrene butadiene rubber (SBR) |
| Manufacturer | REDOCOL |
| Name | REDOCOL Osterbond Spray 570.52 Fine Fix |
| Press time | Reduced time with high pressure |
Downloads
Adobe Portable Document Format (PDF)
Services
About OSTERMANN
Products
Information
Legal information
© 2024 Rudolf Ostermann GmbH