English
Roller Shutters - Easy-Roll Box
Manual Module for Poly-Metallic Mats (vertical running)
The Easy-Roll box has been specially designed for the Poly-Metallic roller shutter mat. The mechanism used here is the space-saving Roll-Lift, which ensures active weight compensation of the roller shutter in almost every opening position. Like all OSTERMANN boxes, the Easy-Roll box can also be installed in just a few steps. The system is suitable for retrofitting.
Ready-to-install roller shutter box
Vertical
D: min. 267 mm
a: min. 5 mm
b: min. 15 mm (in case of locks more if necessary)
X: H: 300-1600mm = 173 mm / H: 1601-2300mm = 224 mm
t: 19 mm (side thickness)
Width (outside carcass dimension):
min. 400 mm / max. 1200 mm
Height (outside carcass dimension):
max. 2300 mm
Installed in just 6 simple steps. Without milling.
Assembly - it's That Easy:
- Screw the guide rails on the right and left onto the carcass
- Screw the base profile onto the top of the carcass
- Push the box in as far as it will go and screw it in place
- Press the cover profiles onto the plastic guide rails
- Clip the pilaster strip onto the base profile
- Place the cover caps on the top and bottom of the cover profiles
Contents:
- 1 x box with inserted roller shutter
- 1 x base profile pilaster strip (plastic)
- 1 x pilaster strip (aluminium)
- 1 x pair of guide rails (plastic)
- 1 x pair of cover profiles (aluminium)
- 2 x top cover caps (plastic)
- 2 x bottom cover caps (plastic)
Matching Mat System:
Aluminium:
Matching Guide System:
Fit Top
Further Information
